Isaiah Jones 5/18/10

• Today I worked on my fortune teller and I finished it
• Also I put in the LCD screen, put the LED’s in and the button that controls it
• Another thing I did was I changed some of my fortunes
• After lunch I started to play on the computer because I was done
• Also I soldered a little because I had to connect some wires
• Another thing I did was I hot glued the LED’s to my box

aaron murdock 5/6/10

Today in Greenfab we worked on on transferring sound trough laser. The first step was to solder two wires to an audio jack. After which  we solder together a transformer, LED light, and batter pack together. Once we were done with those two steps we solder together the audio jack to a solar panel. After this we pointed the LED light on the solar panel for it to make sound. The activity was pretty fun. When I came back from lunch I began to put together my final project.

aaron murdock 5/10/10

Today in Greenfab we worked on building mixers. The material we need that for that in clouded a bread board, 5 led, wires, Aarduino, 2 switch, alligator clips, speaker, potentiometers, 5 resistors and 10k resistors. The first step was to connect the leds to the bread board. After which we plugged the resistors on the other side of the board. Once we had it all wired up we hooked MW up to the speakers and started to make different noise. Following lunch we went on trip touring battery park. The purpose of the trip was to show and point out the green features in the park.

malik

My project is a robot that moves foword

It is power by solar panels three of them

I used cardboard for the body

Nestor 5/17/10

My project is a solar powered table.  This table charges usb devices using energy form the sun.  Today I soldered all of the solar cells together and cut out the top frame for my table.  I am curently working on bulding the sides of the table so it can stand on its own.  I also need to connect a 5.v regulator to it and the usb port.

four step sequencer

it”s my final project. its a project that put u n control the sound of your music. you could speed up the sound or slow it down.you could make the sound high or lower.

Santana 5, 17 2010

Blog,

Today at green fab it was a interesting day. Today at green fab i arrived early to green fab. Last week James told me that he was going to work more on my project that he was going to take it home with him. Whe I came to green fab Carlos told me that James was coming lae to green fab, so he told me that i had to work on my speach for thursday (5,20,2010) for my presentation. This is a copy of my speach,

My project’s name is The Amazing Talking Door.  I decided to create this project because I would like to add more functionality to the way doors are used.  I also wanted to show an example of how The Amazing Talking Door could be used in the future.  My project is simple, but in the future I’d like to invite engineers and inventors to work with me in continuing to develop my project,  and to assist me in convincing every store-owner to have one of my projects on their storefront.  I want to thank James for all the help he gave me.   If it was not for him I could not have done my project.

It was time for lunch and i went out side to play basketball with my class mate. When i came back from lunch time i started working on my project a little more because it had a little of a problem because people tuch it a lot. It was time to go home and that was it for the day at green fab 5,17,2010.

• today in greenfab i worked on my final project code
• i made my project be able to mix colors between red blue and green it can  turn in to strobe light mode
• then after lunch made the outer part out of cardboard

christopher williams may 14 2010

• today at greenfab i worked on my final project some more.
• today i had to do my code all over again because i  lost the computer that my code was on.
• so after lunch i got the whisker switch and applied it to my bread board.
• after a few adjustments i was able to make it work.
• today aside from that i didnt do much work, i wish i did.
• i wish i would have been more constructive and more focused on my work.
• i wish i would have left my ipod home so i could have focused more.
• i wish i would have got back from lunch earlier so i could have done more work, and maybe finished my project today.
• i wish i would have took this more serrious than what i did.
• i wish i would have never been playing around with saul and isiah so they could have finished their work.
• next week by monday my final project will be complete and ready to go.
• monday i will be more focused and cunstructive and i will leave my ipod in my pocket the whole time.

Santana 5/13/2010

Blog,

Today at green fab it was a really interesting day. Today at green fab i finally finish my final project at green fab. When had arrived at green fab i started working on my project as fast as i could. James helped me finish my project too. When i finish building everything and putting everything together It was a little miner problem. James told me that we had to work on it a little more but he could not help me no more on till next week. I started doing some research on talking door and i found out a lots of new and different forms of doing some talking doors, but james told me that we could do it does way because green fab could not afford it. It was lunch time and like always i went to the park and started playing basketball. When i came back i started doing more research bout when i saw the clock it was time to go home. The was the end on the day at green fab. 5/13/2010